Beschreibung
Low cost Survey tripleband GNSS antenna receiving L1/L2/L5, with TNC connector and 2.5m cable terminated with SMA male.
Good to know:
– Compatible with all simpleRTK2B and simpleRTK3B boards as well as any other multiband GNSS receiver in the market.
3B Survey Budget antenna
Antenna element
- Supported positioning signal bands:
- GPS: L1, L2, L5
- GLONASS: G1, G2, G3
- BeiDou: B1, B2, B3
- Galileo: E1, E5
- QZSS: L1, L2
- Navic: L5
- SBAS: WAAS, EGNOS, MSAS, GAGAN and SouthPAN
- Polarization: RHCP
- Peak gain: 5dBi
- Axial Ratio @ zenith: <3dB
- Azimuth Coverage: 360 degrees
- Impedance: 50 ohm
- Phase center error: ±3mm
Electrical
- Supply voltage: 3-5.5V
- Typical supply current @ 3V: 50mA
- Average LNA gain: 40dB
- Maximum Noise Figure: 1.5dB
- Maximum VSWR: 2
Mechanical
- Maximum length: 147mm
- Weight: 390g
- Mounting style: Magnetic base (requires accessory) or 5/8” x 11TPI thread
- Connector: TNC female
- Cable length: Includes 2.5 meter cable terminated in SMA male
Environmental
- Operating Temperature: -40 to +85°C
- Storage Temperature: -40 to +85°C
- IP Rating: IP66 (excluding air vent in screw hole, which can be sealed when installed)
- RoHS: Yes
